Cleaning

We recommend washing your windows/
doors thoroughly with clean water at least twice a year. You may add a small amount of car soap. If the surface is kept clean, your windows/doors will stay presentable with long maintenance intervals. Please note that most glass detergents contain ammoniac. As ammoniac damages paint, we recommend a thorough cleansing with clean water afterwards.

Damages to the surface

It is of utmost importance that the surface is always intact. Any damages are to be repaired immediately. When cleaning the items, it is therefore recommended that you check the surface. Should you find any surface damage, they are to repaired in the following way:

The damaged spots - and only these - are to be sandpapered gently with fine sandpaper (180-200 corn is recommended). Do not sandpaper through the base coat. In case of severe damage the whole frame or sash part is to be sandpapered. All dust is to be removed, and 2 layers of paint or stain colours in the selected colour are to be put on.

Please note! If covering the elements, only use UV-resistant tape suitable for acrylic paint (e.g. Tesa-UV-resistant tape 4438 (blue)). The tape must be removed again within 2 weeks. 

Surface

Condition

Preparation

Primer/

Base Coat

End Treatment

Paint Colour

End Treatment

Stain Colour

Slightly 

damaged

• Washing
• Gently  sandpapering 
• Removal of    any silicone remnants

2x Gori Topcoat

or other Solvent Based Topcoat

2x Gori Topcoat or other Solvent

Transparent Top-

coat

Badly 

damaged

• Washing
• Gently sandpapering
• Removal of any silicone remnants

1x Gori         Primer/

Base Coat